« previous next »
Pages: 1 [2] 3

Author Topic: Oct 31st, UBCSCC slush series 2 at Boundary Bay  (Read 4089 times)

Offline an nguyen

  • Sr. Member
  • ****
  • Posts: 468
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #15 on: October 29, 2004, 04:28:02 pm »
remember to turn back the alarm clock!
Logged
stx 95 talon awd, stu 95 m3

Offline Clayton Ulmer

  • Sr. Member
  • ****
  • Posts: 338
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #16 on: October 29, 2004, 10:59:04 pm »
What time does it all start and end at?  I will probably show up after work if it is still goin on.
Logged
arting out Car, check the parts store for parts and prices!

Offline an nguyen

  • Sr. Member
  • ****
  • Posts: 468
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #17 on: October 30, 2004, 01:32:16 pm »
actual driving is ~930am~3pm or so.

dam, i'm out!  found out front upper control arms were scraping inside fenders =(

1. Jovan Ceklaj
2. Martin Raska
3. Robin Toor
4. Emerson T.
5. Matt Demick
Logged
stx 95 talon awd, stu 95 m3

Offline Martin Raska

  • Hero Member
  • *****
  • Posts: 2724
    • http://www.FormulaUBC.com
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #18 on: October 30, 2004, 06:56:22 pm »
An, don't you have 2 cars?
Logged
url=www.paypal.com/xclick/business=martin%40raska.net&item_name=Martin+Raska+is+a+swell+guy&no_note=1&tax=0&currency_code=USD]Now accepting donations![/url]

Offline Matt Demick

  • Hero Member
  • *****
  • Posts: 2132
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #19 on: October 31, 2004, 04:41:56 pm »
Well thanx for everyone who signed up and actually came! LOL IT was just Jovan, Martin and I there.

It was a nice day, kinda cold in the morning though. I got a couple of clean runs through but nothing that impressive. Kinda hard to win when my class has new S2000's, and WRX's all around me lol. But a good time non the less

Oh yea Jovan! Did u finally pick all those weeds outta ur teath there buddy?  :wink:
Logged
0' Eagle Talon TSI AWD, JDM 4G63 6/4 Bolt,DSM LINK, X-treme FMIC, 16G/20G Hybrid, Tial BOV, MBC @22psi, 255 Walbro, GM Maf, 680 injectors, WEB 264 Cams, SS Header, 2.5" TurboBack with O2 Elliminator, Tail 38mm External Waste Gate, Fidanza flywheel, ACT 2600 race clutch, and Fidanza Race Shifter

Offline John Hartman

  • Senior Member
  • Hero Member
  • *
  • Posts: 17539
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #20 on: October 31, 2004, 04:55:37 pm »
looked like an awesome day.

And as for being put in ESP, I hear ya man.
Logged
91 Eagle Talon TSi 5spd awd.  GT-12, TriFlow Cams, 850s, Tial, JIC, Jackal, sticky rubber.
86 Merkur XR4Ti 5spd, rwd, turbo, 91,381km.  Original paint, heated leather. intercooled, big VAM, Full 3" exhaust, Cossie sway bar, 16" tires.
06 Mazdaspeed6 6spd awd, DISI turbo, heated leather HIDs, Corksport, Cobb, Konig, Centric...
2018 VW Golf Alltrack turbo Tornado Red, 6mt, some free mods

Offline Martin Raska

  • Hero Member
  • *****
  • Posts: 2724
    • http://www.FormulaUBC.com
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #21 on: October 31, 2004, 05:25:45 pm »
Jovan will never hear the end of his disapearance into the weeds.  Video to come though it's not very good - no zoom.  Good day, kinda cold, tires never heated up well, car not running perfect, but a lot of fun as always.
Logged
url=www.paypal.com/xclick/business=martin%40raska.net&item_name=Martin+Raska+is+a+swell+guy&no_note=1&tax=0&currency_code=USD]Now accepting donations![/url]

Offline Jovan Ceklaj

  • Hero Member
  • *****
  • Posts: 2290
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #22 on: October 31, 2004, 06:06:03 pm »
Martin and Matt, mock me all you want.  I still got the fastest time of the day by a good 1/2 second over Martin.  Where's the big mouth now? 8)
Logged
 1989 Nissan 240sx (daily POS/autocross slut)
- '92 6/4 bolt Tsi AWD 5 spd. (Burned to the ground!)

Offline John Hartman

  • Senior Member
  • Hero Member
  • *
  • Posts: 17539
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #23 on: October 31, 2004, 06:38:02 pm »
Jovan, you had FTD for the whole thing?  Or just in your thing with Martin and Matt?
Logged
91 Eagle Talon TSi 5spd awd.  GT-12, TriFlow Cams, 850s, Tial, JIC, Jackal, sticky rubber.
86 Merkur XR4Ti 5spd, rwd, turbo, 91,381km.  Original paint, heated leather. intercooled, big VAM, Full 3" exhaust, Cossie sway bar, 16" tires.
06 Mazdaspeed6 6spd awd, DISI turbo, heated leather HIDs, Corksport, Cobb, Konig, Centric...
2018 VW Golf Alltrack turbo Tornado Red, 6mt, some free mods

Offline Martin Raska

  • Hero Member
  • *****
  • Posts: 2724
    • http://www.FormulaUBC.com
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #24 on: October 31, 2004, 08:54:37 pm »
.35 seconds I believe it was.  But risked totalling a car the first run, hotter tires, 2 more runs than me, and  pick a few more numbers between 1 and 1000, I got some more excuses.

Big thanks to Matt, and his random appearance with a album of cotter pins just when we needed one.

John, fastest time of the whole deal we cleaned house as usual.

Jovan, I'm not sure if this is me or you, at first I thought you, but then I thought it might be me. bah.

Logged
url=www.paypal.com/xclick/business=martin%40raska.net&item_name=Martin+Raska+is+a+swell+guy&no_note=1&tax=0&currency_code=USD]Now accepting donations![/url]

Offline John Hartman

  • Senior Member
  • Hero Member
  • *
  • Posts: 17539
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #25 on: October 31, 2004, 09:10:48 pm »
oh in THAT :D

I was gonna say if you did it in the Talon, holy crap.

Even then, very nice job, there were alot of good drivers and well done cars out at the event I went to.
Logged
91 Eagle Talon TSi 5spd awd.  GT-12, TriFlow Cams, 850s, Tial, JIC, Jackal, sticky rubber.
86 Merkur XR4Ti 5spd, rwd, turbo, 91,381km.  Original paint, heated leather. intercooled, big VAM, Full 3" exhaust, Cossie sway bar, 16" tires.
06 Mazdaspeed6 6spd awd, DISI turbo, heated leather HIDs, Corksport, Cobb, Konig, Centric...
2018 VW Golf Alltrack turbo Tornado Red, 6mt, some free mods

Offline Jovan Ceklaj

  • Hero Member
  • *****
  • Posts: 2290
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #26 on: October 31, 2004, 09:28:18 pm »
Quote from: "John Hartman"
I was gonna say if you did it in the Talon, holy crap.


Agreed.  Especially in a Talon with a blown headgasket :P

Getting the FTD isn't all that hard in that car.  Basically, if you DON'T get FTD in an open wheeled car, you should seriously consider giving up driving

Matt, you sure came through for us with randomly having a set of cotter pins.  Strange thing to carry around with you but thanks!

Martin,  Excuses excuses :roll: .  Same car, same setup, you have a 20 lb advantage on me.  Also, that's clearly me;  you're not that tall :wink:
Logged
 1989 Nissan 240sx (daily POS/autocross slut)
- '92 6/4 bolt Tsi AWD 5 spd. (Burned to the ground!)

Offline Robin Toor

  • Hero Member
  • *****
  • Posts: 2473
    • http://bcdsm.labattz.com/Robin%20Ride/featured_ride.htm
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #27 on: October 31, 2004, 09:52:42 pm »
Quote from: "Jovan Ceklaj"
Also, that's clearly me;  you're not that tall :wink:


He also doesn't have that big of a nose....


ohhhh SNAP!
Logged

Offline Jovan Ceklaj

  • Hero Member
  • *****
  • Posts: 2290
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #28 on: October 31, 2004, 10:37:00 pm »
Overall
Top times
Indexed results

Martin, what the hell happened to your times?
Logged
 1989 Nissan 240sx (daily POS/autocross slut)
- '92 6/4 bolt Tsi AWD 5 spd. (Burned to the ground!)

Offline Martin Raska

  • Hero Member
  • *****
  • Posts: 2724
    • http://www.FormulaUBC.com
Oct 31st, UBCSCC slush series 2 at Boundary Bay
« Reply #29 on: October 31, 2004, 11:23:05 pm »
Good question.  I guess I really suck, I wish they weren't telling me I had clean runs while I was doing them.  I'm going to quit driving now.
Logged
url=www.paypal.com/xclick/business=martin%40raska.net&item_name=Martin+Raska+is+a+swell+guy&no_note=1&tax=0&currency_code=USD]Now accepting donations![/url]
Pages: 1 [2] 3
« previous next »