While testing the MPI relay I stumbled upon the issue.
The 20a ignition fuse was barely melted...Actually if I shake it , it would connect.
Had to take out the fuse cover to actually see if it was disconnecting.
While shaking the Fuse assembly (to the positive batt) the ignition pwr wire actually fell off.
I pushed the cross wire in the fuse to reconnect,reinstall/repaired the ign pwr wire.
Crank the engine with noid light on 3,4 and the motor started briefly.
Ran the car for ten minutes (with all injectors connected),,,,,removed the spare PT and coil, left the spare CAS on the motor.
Ran the car again to make sure everything was OK..
The whole process was very educational..(but inconvenient).
Thanks everyone for the input.
Thanks Lowell for directing me to find the problem.