Author Topic: Got Crackin on my Body Work Today  (Read 1311 times)

Offline Jason Harwood

  • Hero Member
  • *****
  • Posts: 2507
Got Crackin on my Body Work Today
« on: April 06, 2009, 09:06:22 pm »


Took off the bumper, fender and broken light.

Installed new Fender, CF hood and awaiting my light installation.
Ended up meeting up with a guy who had a light in better condition.
So thats on hold till tomorrow.

I also found alot of random wires that were freying under the fender well.
So I replaced them all. Which, took most of my time till I ran out of sun light.

So heres a before shot (with bumper off)

Ill post an after shot hopefully tomorrow if I get done baseball practise early.
88' MX6 Turbo - 14.2 @ 97.51MPH
94' MX6 V6 - 13.9 @ 96.7MPH
93' Civic Turbo - 14.7 @ 90MPH (bad tune)
90' Civic SI - Auto-X Machine
97' Eclipse GSX 13.6 @ 105MPH
96' Jeep Grand Cherokee Laredo
97' Acura EL 14.5 @ 98MPH
'02 Lexus IS300 15.125 @ 91MPH
97' CR-V Winter Beater.
04' WRB WRX STI

Offline Ryan Coft

  • Administrator
  • Hero Member
  • *****
  • Posts: 1973
  • Retired!
Re: Got Crackin on my Body Work Today
« Reply #1 on: April 06, 2009, 10:51:08 pm »
That is a massive ic, and I thought mine was big (kinetics race ic)

Offline Jason Harwood

  • Hero Member
  • *****
  • Posts: 2507
Re: Got Crackin on my Body Work Today
« Reply #2 on: April 07, 2009, 06:47:23 am »
That is a massive ic, and I thought mine was big (kinetics race ic)

Yea when I got the bumper off I was suprised as to how big it was my self.
I took the rebar off just to take a look at it. You can see on the FMIC where the rebar was its got that black dusty line going up the middle.
88' MX6 Turbo - 14.2 @ 97.51MPH
94' MX6 V6 - 13.9 @ 96.7MPH
93' Civic Turbo - 14.7 @ 90MPH (bad tune)
90' Civic SI - Auto-X Machine
97' Eclipse GSX 13.6 @ 105MPH
96' Jeep Grand Cherokee Laredo
97' Acura EL 14.5 @ 98MPH
'02 Lexus IS300 15.125 @ 91MPH
97' CR-V Winter Beater.
04' WRB WRX STI

Offline Josh Royle

  • Hero Member
  • *****
  • Posts: 985
  • 6 Bolt Swap
Re: Got Crackin on my Body Work Today
« Reply #3 on: April 07, 2009, 04:58:13 pm »


mines pretty much the same it looks like

Lets see more
1998 GST
Built 6 Bolt Swap/ 3" Turbo Back /Blitz BOV/Apexi SAFC/AutoMeter Cobalt Boost.Oil Prs. AF Gauge/MBC/Hard Intake pipe/Skunk 2/ HID 10K/ FMIC

Offline Matt Mann

  • Hero Member
  • *****
  • Posts: 1454
Re: Got Crackin on my Body Work Today
« Reply #4 on: April 07, 2009, 05:10:36 pm »
Those are both ginormous!!!  ;D
1993 Black NT (RIP)
1990 Champayne TSI FWD
1995 Black NT (SOLD)

Offline Jason Harwood

  • Hero Member
  • *****
  • Posts: 2507
Re: Got Crackin on my Body Work Today
« Reply #5 on: April 07, 2009, 07:46:38 pm »
Those are both ginormous!!!  ;D

THATS WHAT SHE SAID.


Anyways!

Got crackin a bit more today.
Didnt have time to get my light due to base ball practise, so it just needs to be installed and bumper put back on and ill insure her again!

New pix!

New CF hood!

New Fender!
88' MX6 Turbo - 14.2 @ 97.51MPH
94' MX6 V6 - 13.9 @ 96.7MPH
93' Civic Turbo - 14.7 @ 90MPH (bad tune)
90' Civic SI - Auto-X Machine
97' Eclipse GSX 13.6 @ 105MPH
96' Jeep Grand Cherokee Laredo
97' Acura EL 14.5 @ 98MPH
'02 Lexus IS300 15.125 @ 91MPH
97' CR-V Winter Beater.
04' WRB WRX STI

Offline Shane Sawatzki

  • Hero Member
  • *****
  • Posts: 1930
Re: Got Crackin on my Body Work Today
« Reply #6 on: April 07, 2009, 08:08:13 pm »
She said this was huge too...  :D ;)

p.s, car is lookin good man, looks like u had the same sorta incident as I did... I needed a passenger front fender and headlight aswell...lol
2011 Range Rover Sport SC - wife’s daily
1995 Range Rover Classic - restoration project
1990 Mitsubishi Delica - my daily
92 Skyline GTR - weekend warrior
93 Skyline GTR - wife’s weekend warrior
91 Skyline GTS-4 - Sold
91 Tsi AWD - Sold

Offline Josh Royle

  • Hero Member
  • *****
  • Posts: 985
  • 6 Bolt Swap
Re: Got Crackin on my Body Work Today
« Reply #7 on: April 07, 2009, 10:39:30 pm »
Hood and fender both look really nice
1998 GST
Built 6 Bolt Swap/ 3" Turbo Back /Blitz BOV/Apexi SAFC/AutoMeter Cobalt Boost.Oil Prs. AF Gauge/MBC/Hard Intake pipe/Skunk 2/ HID 10K/ FMIC

Offline Zach Holt

  • Senior Member
  • Hero Member
  • *
  • Posts: 3625
Re: Got Crackin on my Body Work Today
« Reply #8 on: April 08, 2009, 12:21:41 am »
She said this was huge too...  :D ;)

p.s, car is lookin good man, looks like u had the same sorta incident as I did... I needed a passenger front fender and headlight aswell...lol



Buy a god damn J pipe! lol shore rout piping NOW! shane. lol ;)
http://en.wikipedia.org/wiki/Mitsubishi
Then google.
Then read old postings about it.
Then ask.

Jamie Oswald

  • Guest
Re: Got Crackin on my Body Work Today
« Reply #9 on: April 08, 2009, 12:31:02 am »
Yeahhh buddayy, if i come out to misson i expect a rip in that!

Offline Jason Harwood

  • Hero Member
  • *****
  • Posts: 2507
Re: Got Crackin on my Body Work Today
« Reply #10 on: April 08, 2009, 07:03:46 am »
Yeahhh buddayy, if i come out to misson i expect a rip in that!

I guess we can work something out.
88' MX6 Turbo - 14.2 @ 97.51MPH
94' MX6 V6 - 13.9 @ 96.7MPH
93' Civic Turbo - 14.7 @ 90MPH (bad tune)
90' Civic SI - Auto-X Machine
97' Eclipse GSX 13.6 @ 105MPH
96' Jeep Grand Cherokee Laredo
97' Acura EL 14.5 @ 98MPH
'02 Lexus IS300 15.125 @ 91MPH
97' CR-V Winter Beater.
04' WRB WRX STI

Offline Graeme H Burvill

  • Hero Member
  • *****
  • Posts: 1583
Re: Got Crackin on my Body Work Today
« Reply #11 on: April 08, 2009, 10:11:41 am »
Hey Josh what is that crazy sidemount setup you got going there for?
Talon TSI-Champagne...She must live again...

Offline Jason Harwood

  • Hero Member
  • *****
  • Posts: 2507
Re: Got Crackin on my Body Work Today
« Reply #12 on: April 08, 2009, 10:31:02 am »
I think its the stock cold air intake, after the filter and airbox.

I ripped mine out, but it looked different than his,
88' MX6 Turbo - 14.2 @ 97.51MPH
94' MX6 V6 - 13.9 @ 96.7MPH
93' Civic Turbo - 14.7 @ 90MPH (bad tune)
90' Civic SI - Auto-X Machine
97' Eclipse GSX 13.6 @ 105MPH
96' Jeep Grand Cherokee Laredo
97' Acura EL 14.5 @ 98MPH
'02 Lexus IS300 15.125 @ 91MPH
97' CR-V Winter Beater.
04' WRB WRX STI

Jamie Oswald

  • Guest
Re: Got Crackin on my Body Work Today
« Reply #13 on: April 08, 2009, 01:16:56 pm »
Hey Josh what is that crazy sidemount setup you got going there for?

Lmao josh did you forget to remove the SMIC... removve that crap man..its just extra weight... wait... if i remember.. when i was helpin you out i didnt see no SMIC.. nm... its removed now.

Offline Jason Harwood

  • Hero Member
  • *****
  • Posts: 2507
Re: Got Crackin on my Body Work Today
« Reply #14 on: April 08, 2009, 10:50:29 pm »
Lights in.



Bumper On



Finished washed product :)


88' MX6 Turbo - 14.2 @ 97.51MPH
94' MX6 V6 - 13.9 @ 96.7MPH
93' Civic Turbo - 14.7 @ 90MPH (bad tune)
90' Civic SI - Auto-X Machine
97' Eclipse GSX 13.6 @ 105MPH
96' Jeep Grand Cherokee Laredo
97' Acura EL 14.5 @ 98MPH
'02 Lexus IS300 15.125 @ 91MPH
97' CR-V Winter Beater.
04' WRB WRX STI