Author Topic: SSAC/XSPWR FMIC  (Read 2473 times)

Offline Trev_Scott

  • Hero Member
  • *****
  • Posts: 512
SSAC/XSPWR FMIC
« Reply #15 on: February 20, 2007, 10:33:00 pm »
You have to contact them directly from their site. Just let them know you are part of the "dsmtuners" group buy for $295.
- 04 Audi A4 1.8t - (Slightly modded)
- 95 Tsi - Ported sbr mani with tial38, evo3 turbo/O2, 650's, aro afpr,
wineboro 255, 10.5x28x3.5 XS-PWR fmic, Type-s, MBC,
Apexi N1 DP/Exhaust, Maf GenII  3.5" maf, Pocket logger,
Innovate LC1, Stage3 eprom,  poly mounts, act2600/flywheel
BS removed *RIP

Offline Trev_Scott

  • Hero Member
  • *****
  • Posts: 512
SSAC/XSPWR FMIC
« Reply #16 on: February 27, 2007, 11:47:49 am »




- 04 Audi A4 1.8t - (Slightly modded)
- 95 Tsi - Ported sbr mani with tial38, evo3 turbo/O2, 650's, aro afpr,
wineboro 255, 10.5x28x3.5 XS-PWR fmic, Type-s, MBC,
Apexi N1 DP/Exhaust, Maf GenII  3.5" maf, Pocket logger,
Innovate LC1, Stage3 eprom,  poly mounts, act2600/flywheel
BS removed *RIP

Offline Graeme H Burvill

  • Hero Member
  • *****
  • Posts: 1583
SSAC/XSPWR FMIC
« Reply #17 on: February 27, 2007, 12:33:40 pm »
props man! nice lookin front mount. Hows she feel?
Talon TSI-Champagne...She must live again...

Offline Trev_Scott

  • Hero Member
  • *****
  • Posts: 512
SSAC/XSPWR FMIC
« Reply #18 on: February 27, 2007, 02:15:20 pm »
Not to bad. Should be allot better when i have her at 22psi :twisted:  
It's only at 15 right now until i change the fuel filter.
- 04 Audi A4 1.8t - (Slightly modded)
- 95 Tsi - Ported sbr mani with tial38, evo3 turbo/O2, 650's, aro afpr,
wineboro 255, 10.5x28x3.5 XS-PWR fmic, Type-s, MBC,
Apexi N1 DP/Exhaust, Maf GenII  3.5" maf, Pocket logger,
Innovate LC1, Stage3 eprom,  poly mounts, act2600/flywheel
BS removed *RIP

Offline Fraser Cassells

  • Ass-engined Nazi-mobile owner, cause i'm too good for DSM's now
  • Hero Member
  • *****
  • Posts: 2050
SSAC/XSPWR FMIC
« Reply #19 on: February 27, 2007, 04:08:57 pm »
I like how it sits up nice and tight behind the bumper.

btw- are you an electrician Trev?
1990 AWD Talon, Cumulative 432WHP parts depository...soldinated!
2008 911 Turbo
2014 Audi S4
2011 Ducati Hypermotard

Offline Trev_Scott

  • Hero Member
  • *****
  • Posts: 512
SSAC/XSPWR FMIC
« Reply #20 on: February 27, 2007, 05:32:45 pm »
It mounted really nicely. Just used the existing bolt holes from the fogs.

Sorta... Just what Iv lernt from my dad. He's an electrician.  I'll be going to school in the fall to become a electrical engineer.
Was it the tools that gave it away?
- 04 Audi A4 1.8t - (Slightly modded)
- 95 Tsi - Ported sbr mani with tial38, evo3 turbo/O2, 650's, aro afpr,
wineboro 255, 10.5x28x3.5 XS-PWR fmic, Type-s, MBC,
Apexi N1 DP/Exhaust, Maf GenII  3.5" maf, Pocket logger,
Innovate LC1, Stage3 eprom,  poly mounts, act2600/flywheel
BS removed *RIP

Offline Kevin Chan

  • Hero Member
  • *****
  • Posts: 932
SSAC/XSPWR FMIC
« Reply #21 on: February 27, 2007, 08:33:12 pm »
does it keep the rebar?
o___0"
98 UZS160 hovering on air

Offline Trev_Scott

  • Hero Member
  • *****
  • Posts: 512
SSAC/XSPWR FMIC
« Reply #22 on: February 27, 2007, 10:04:45 pm »
I don't think so. I bought the car with the stupid kit, I think the previous owner had taken it off along with the bumper.
- 04 Audi A4 1.8t - (Slightly modded)
- 95 Tsi - Ported sbr mani with tial38, evo3 turbo/O2, 650's, aro afpr,
wineboro 255, 10.5x28x3.5 XS-PWR fmic, Type-s, MBC,
Apexi N1 DP/Exhaust, Maf GenII  3.5" maf, Pocket logger,
Innovate LC1, Stage3 eprom,  poly mounts, act2600/flywheel
BS removed *RIP

Offline Jesse Veitch

  • Hero Member
  • *****
  • Posts: 1351
SSAC/XSPWR FMIC
« Reply #23 on: March 03, 2007, 03:28:12 pm »
trev how did they ship it to you? USPS?

- I've read about these on DSM tuners.. people have tested them to 75psi, hundreds of people have purchased them now.. and there are no reported problems at all.. as I see it, there is no justification in spending $1000 any more.. some ebay stuff sucks, some of it works.
97 TSi AWD
92 TSi AWD 6/4 bolt - Sold

Offline Trev_Scott

  • Hero Member
  • *****
  • Posts: 512
SSAC/XSPWR FMIC
« Reply #24 on: March 03, 2007, 05:54:35 pm »
I had it shipped fedex to a US post office. I just went across and brought it back.
- 04 Audi A4 1.8t - (Slightly modded)
- 95 Tsi - Ported sbr mani with tial38, evo3 turbo/O2, 650's, aro afpr,
wineboro 255, 10.5x28x3.5 XS-PWR fmic, Type-s, MBC,
Apexi N1 DP/Exhaust, Maf GenII  3.5" maf, Pocket logger,
Innovate LC1, Stage3 eprom,  poly mounts, act2600/flywheel
BS removed *RIP

Offline Graeme H Burvill

  • Hero Member
  • *****
  • Posts: 1583
SSAC/XSPWR FMIC
« Reply #25 on: March 03, 2007, 06:23:20 pm »
It'd be nice if they sized one , so you didnt have to remove your foglights. just make the drivers side of the core's,  flange face the engine.
But good deal.
Talon TSI-Champagne...She must live again...

Offline Andrew Steele

  • Senior Member
  • Hero Member
  • *
  • Posts: 3126
    • http://www.bcdsm.org
SSAC/XSPWR FMIC
« Reply #26 on: March 06, 2007, 03:11:18 pm »
Looks decent.

Here's hoping SSAutochrome can start to redeem their crap name w/ this product.
1999.5 Audi A4 2.8L Quattro Tip
1994 Eagle Talon (SOLD)
1993 Eagle Talon TSi AWD (SOLD)

Offline Trev_Scott

  • Hero Member
  • *****
  • Posts: 512
SSAC/XSPWR FMIC
« Reply #27 on: April 06, 2007, 12:33:17 pm »
Update:

Still pullin hard. I haven't had to touch it once. Pipes, clamps, and couplers are still holding up great.
I couldn't ask for more in a fmic. :D
- 04 Audi A4 1.8t - (Slightly modded)
- 95 Tsi - Ported sbr mani with tial38, evo3 turbo/O2, 650's, aro afpr,
wineboro 255, 10.5x28x3.5 XS-PWR fmic, Type-s, MBC,
Apexi N1 DP/Exhaust, Maf GenII  3.5" maf, Pocket logger,
Innovate LC1, Stage3 eprom,  poly mounts, act2600/flywheel
BS removed *RIP