So I have Venom running and driving but there are a few things to sort out, one of which is the aforementioned rough idle. I am going to do a bunch of searching right now but just in case this rings a bell with someone, I'll ask here first.
Sounds like a miss but smooths out when RPM's are raised towards 1500-2000.
Injectors appear to function, as do plugs, cables, etc....
Boost leak checked and fixed all boost/vacuum leaks,...... I think..... (found a leaky fuel line while I was at it)
Coolant temp sensor works, TPS is adjusted, base idle is set and BISS has been set.
By the way.... my timing was off by a tooth but I reset the timing the other day and it is much better than it was at that point.
I noticed if I pinch the vacuum line going to the MAP ( I am on speed density by the way) the motor almost instantly smooths out but after a few seconds it doesn't want to run anymore, so I released the pinch and it goes back to idling rough...
It runs at about 10 inches hg.
Definitely needs some fine tuning done to the ECU. this will be accomplished with Ostrich. I am not sure if this roughness will be smoothed out with some proper tuning but so far everything seems to check out so hopefully that is all that it needs is a good tune. I may put in new plugs and wires but the engine was running fine before the AEM shit the bed and I couldn't use it anymore.
So anyhow, off I go to use the Google machine...