ACT 2600 are these any good

[demetrios aftias]

So I pulled my ACT 2600 out as it was not shifting in to gear, it only has 18k on it does anyone know if these are crap or not & what works good for talons.

[kevin derhouson]

i'm a fan of my spec stage two..good for 400lbs of torque and near stock pedal feel

[Brett Haviland]

its a common problem with the ACT PP's.  seen it more then a few times.

If you still have the recipt or something....it might be worth a try to get it replaced free of charge.

[demetrios aftias]

I got it from Amir he said it had 15k on it and I put 2k on, I found a act 2100 with 1.5k but I'm not shure if I'm going with act again.

[Brett Haviland]

Yeah there sure seems to be a lot of horror stories with act... The springs like to pop out of tHe disks too...

Also if they are not installed correctly and u bend the bellville spring then the fingers break off shortly thereafter.  People seem to have better luck with the 2100 act pressure plate

[Robert Vorley]

I had that happen on the first TWO 2600 act pp.  The first was a finger, the next was half of them leaving me stranded + tow bill.   Third one to be seen. I think I got 25K combined.
Check that the flywheel step height is correct.
If my current one breaks I will go with someone else, maybe a dual. Gl

[demetrios aftias]

I think I got the ACT flywheel from you it should be the awd one.

[Jordan Kruger]

hope mine doesnt kick the bucket like that anytime soon.

[Robert Vorley]

I think I got the ACT flywheel from you it should be the awd one.

My problems seemed to disappear with a new act flywheel and clutch. Still, its a good idea to check the adjustments and height to be sure they are within spec. Its refreshing when the clutch disengages properly. ACT figured there was too much travel which broke the fingers, which suggests improper step height or a gremlin. 

[demetrios aftias]

Well I'm going to use my oem pp with that ACT flywheel & I'll let you know how lone it lasts, lol I ran the oem pp for two months with that ACT flywheel with no problems but now I bolted a gt-3076 on.

[kevin derhouson]

having run a 2600 and spec st2 i prefer the spec :p

[Chad Giffen]

Ive always used an act 2600 with a fresh act flywheel and I have never had any problems. In fact I re-used the ACT pressure plate for two clutch disks before it needed to be replaced due to slight surface cracks. Im on my second now ACT Pressure Plate and thrid clutch disk after 90,000kms

I use a Slowboy Racing Kevlar disk.

[CamWeiss]

I was running an ACT 2100 a while back Same thing happened.

Switched to a Spec Stage 2.
Has, probably 20k on it now and many launches. Holding up well so far.

[Rob Armstrong]

I have run cfdf and 2 act with act flywheel. Had a spring fly out of the act 1 time.
20k on 1 clutch is pretty amazing. I would be all over that.

[demetrios aftias]

I think I got the ACT flywheel from you it should be the awd one.

My problems seemed to disappear with a new act flywheel and clutch. Still, its a good idea to check the adjustments and height to be sure they are within spec. Its refreshing when the clutch disengages properly. ACT figured there was too much travel which broke the fingers, which suggests improper step height or a gremlin.  

Well I installed the oem pp with the act flywheel it shifted much better than the 2600 pp I'll keep you updated on how long it lasts lol.