So i found an old windshield reservoir that I ripped out of my 1988 sunbird back in the day.. turns out the Delco pump on the reservoir still works!. So I decided to mount it up and run power to it
Im wiring it with my meth solenoid signal wire so the intercooler and rad get a very light mist as soon as im at full boost. Im locating the 2 nozzles in the front bumper facing the intercooler and radiator. Today, me and Vlad connected up the fan switch and ran new power to the relay so the fans will work at operating temps again, rather than constant. heres some pics of what I did.
The windshield reservoir and delco pump from a 1988 sunbird
Its mounting tabs.
I decided to mount it infront of my tranny since it fit well there. I fab'd 2 brackets which both mounted to 2 tranny bolts
The reservoir mounted below the intake pipe.
Heres where Im putting 2 light mist nozzles.
I dont expect any real gains other than a more controlled running temp (especially while boosting) and possibly lower intake temps