Author Topic: Painted calipers :)  (Read 899 times)

Offline TroyHill

  • Full Member
  • ***
  • Posts: 120
Painted calipers :)
« on: April 03, 2005, 06:30:02 pm »
I was bored at work today so I painted them up. The will look great against the crossdrilled rotors and white rims.



Offline Aaron Moore

  • Senior Member
  • Hero Member
  • *
  • Posts: 2121
Painted calipers :)
« Reply #1 on: April 03, 2005, 07:56:28 pm »
red x's
2 TSI AWD 16G
95 TSI AWD GROUND BLINGER
98 SPYDER EVO 16G
99 GS400 PIMPED TO THE MAX
2005 300C up and on....

Offline Kimyee Lai

  • Hero Member
  • *****
  • Posts: 2154
Painted calipers :)
« Reply #2 on: April 03, 2005, 09:09:31 pm »
I hope that that's high temp paint...otherwise the paint won't stay on, probably won't stay blue for long either...

Offline TroyHill

  • Full Member
  • ***
  • Posts: 120
Painted calipers :)
« Reply #3 on: April 03, 2005, 09:33:36 pm »
The paint is a high temp paint (engine enamel), so I think/hope it will hold up. (I've used this stuff on things that get much hotter than my calipers and its not faded). :D

Offline Ricky Lim

  • Full Member
  • ***
  • Posts: 112
Painted calipers :)
« Reply #4 on: April 03, 2005, 09:52:19 pm »
How about pictures of them on your car?  8)

Offline TroyHill

  • Full Member
  • ***
  • Posts: 120
Painted calipers :)
« Reply #5 on: April 03, 2005, 11:29:29 pm »
Oh I wish. But my car is in peices (yes the entire front end). You can even see the bottem half of one of my struts in the lower photo. :D:D

Scott Ash

  • Guest
Painted calipers :)
« Reply #6 on: April 04, 2005, 03:52:08 pm »
Where did you get that paint? Ive been looking to do that on my car and looking for that same color too.

Offline TroyHill

  • Full Member
  • ***
  • Posts: 120
Painted calipers :)
« Reply #7 on: April 04, 2005, 08:40:16 pm »
The paint is called 'metalcast' available pretty much anywhere (I got mine from can-tire where I work). I sprayed it over a base of gold VHT paint, to darken it up. Its a semi clear paint so it needs a few coats. I've used it on a valve cover and calipers of another car and had no issues.