« previous next »
Pages: [1]

Author Topic: Grinding noisr from tranny?  (Read 434 times)

Offline Matt Demick

  • Hero Member
  • *****
  • Posts: 2132
Grinding noisr from tranny?
« on: October 23, 2004, 05:13:31 pm »
Ok so Jarred and I installed his old exhasut on my talon today. but after we were all done when u leave the car runnin in Nutral it makes a loud grinding noise. Push the clutch in and it stops. Drive in gear and it stops :S . Is this my release barring going? Make no sence it didn't make any noise when i got to his house, only after he installed the exhaust. But i never even touched it! Your input would be greatly aprecated. Thanx
Logged
0' Eagle Talon TSI AWD, JDM 4G63 6/4 Bolt,DSM LINK, X-treme FMIC, 16G/20G Hybrid, Tial BOV, MBC @22psi, 255 Walbro, GM Maf, 680 injectors, WEB 264 Cams, SS Header, 2.5" TurboBack with O2 Elliminator, Tail 38mm External Waste Gate, Fidanza flywheel, ACT 2600 race clutch, and Fidanza Race Shifter

Cam Bonner

  • Guest
Grinding noisr from tranny?
« Reply #1 on: October 23, 2004, 06:15:10 pm »
my 510 does that. its just the throw out bearing dieing.

however my friends Tracker did that to...and it was the whole tranny getting ready to grenade. (found out the hard way)
Logged

Offline Martin Raska

  • Hero Member
  • *****
  • Posts: 2724
    • http://www.FormulaUBC.com
Grinding noisr from tranny?
« Reply #2 on: October 24, 2004, 02:45:23 am »
muffler bearings on their way out?
Logged
url=www.paypal.com/xclick/business=martin%40raska.net&item_name=Martin+Raska+is+a+swell+guy&no_note=1&tax=0&currency_code=USD]Now accepting donations![/url]

Danny Bouliane

  • Guest
Grinding noisr from tranny?
« Reply #3 on: October 24, 2004, 03:33:20 am »
mine does the same thing... even with a new throwout bearing :evil:
Logged

Offline Mike Schmid

  • Hero Member
  • *****
  • Posts: 4281
Grinding noisr from tranny?
« Reply #4 on: October 24, 2004, 04:08:27 am »
If it stops when the clutch is pushed in you've got a bad input shaft bearing.  Say hello to a tranny rebuild....

Been there, done that, it sucks.
Logged
DSMs - fun when they run

'92 TSi AWD AT - 180bhp
'93 TSi AWD - 195bhp
'90 Laser RS NT - *sold*
'71 Camaro - *sold*

Offline Robin Toor

  • Hero Member
  • *****
  • Posts: 2473
    • http://bcdsm.labattz.com/Robin%20Ride/featured_ride.htm
Grinding noisr from tranny?
« Reply #5 on: October 24, 2004, 12:22:16 pm »
Either input shaft or throw out berring...
Logged

Offline Matt Demick

  • Hero Member
  • *****
  • Posts: 2132
Grinding noisr from tranny?
« Reply #6 on: October 24, 2004, 05:15:33 pm »
Well did a lot of driving today and it never came back since Jarreds house yesterday. Hmm i'm gonna price out a tranny ( mine stock and never been toched :S). And my clutch is dead anyways time for a act 2600 or mabe a carbonfiber one.  

Anyways looks like my friend at All Tech is gonna have his hands full this upcoming month
Logged
0' Eagle Talon TSI AWD, JDM 4G63 6/4 Bolt,DSM LINK, X-treme FMIC, 16G/20G Hybrid, Tial BOV, MBC @22psi, 255 Walbro, GM Maf, 680 injectors, WEB 264 Cams, SS Header, 2.5" TurboBack with O2 Elliminator, Tail 38mm External Waste Gate, Fidanza flywheel, ACT 2600 race clutch, and Fidanza Race Shifter

Offline Mike Schmid

  • Hero Member
  • *****
  • Posts: 4281
Grinding noisr from tranny?
« Reply #7 on: October 25, 2004, 01:59:13 am »
Logged
DSMs - fun when they run

'92 TSi AWD AT - 180bhp
'93 TSi AWD - 195bhp
'90 Laser RS NT - *sold*
'71 Camaro - *sold*
Pages: [1]
« previous next »