« previous next »
Pages: [1]

Author Topic: Meth injection nozzle size identification  (Read 892 times)

Offline CamWeiss

  • Hero Member
  • *****
  • Posts: 1747
Meth injection nozzle size identification
« on: July 28, 2010, 09:46:21 pm »
I was going through a few things in the garage today, and with the spares from my water injection install were three nozzles/injectors.

I can't find any identifiable markings on them to indicate what size/flow rate they are. The only marking on them are a small symbol, possibly a manufacturer symbol. I had the sizes in my PM inbox, but it appears I've deleted the message.

Ideas, guys?

TIA.
Logged
Objects in mirrors appear to be losing.

'92 6/4
'86 325e
'72 240z
'76 R75/6
'07 KTM 640 ADV

Offline andrew volcz

  • Hero Member
  • *****
  • Posts: 864
Re: Meth injection nozzle size identification
« Reply #1 on: July 28, 2010, 09:49:03 pm »
post pics for us to see!

Logged

Offline Marke Bailey

  • Senior Member
  • Hero Member
  • *
  • Posts: 2050
  • B.C.'s quickest DSM.
Re: Meth injection nozzle size identification
« Reply #2 on: July 29, 2010, 07:20:19 am »
what make are the nozzles? devils own prints the size on the side.
Logged
The Sleepy Slushbox.

"She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself."

Offline John Hartman

  • Senior Member
  • Hero Member
  • *
  • Posts: 17539
Re: Meth injection nozzle size identification
« Reply #3 on: July 29, 2010, 08:48:41 pm »
aquamist is by a coloured band and are in milimeters(decimal places of one)

If you can find the maker, you can google it.

Also pay attention to what pressures they are at when measuring as that makes a very big difference.
Logged
91 Eagle Talon TSi 5spd awd.  GT-12, TriFlow Cams, 850s, Tial, JIC, Jackal, sticky rubber.
86 Merkur XR4Ti 5spd, rwd, turbo, 91,381km.  Original paint, heated leather. intercooled, big VAM, Full 3" exhaust, Cossie sway bar, 16" tires.
06 Mazdaspeed6 6spd awd, DISI turbo, heated leather HIDs, Corksport, Cobb, Konig, Centric...
2018 VW Golf Alltrack turbo Tornado Red, 6mt, some free mods

Offline CamWeiss

  • Hero Member
  • *****
  • Posts: 1747
Re: Meth injection nozzle size identification
« Reply #4 on: July 29, 2010, 10:32:26 pm »
One side


Other side - Note symbol I mentioned.










Logged
Objects in mirrors appear to be losing.

'92 6/4
'86 325e
'72 240z
'76 R75/6
'07 KTM 640 ADV

Offline Remi Raymond

  • Hero Member
  • *****
  • Posts: 1974
  • In a 12 step program
Re: Meth injection nozzle size identification
« Reply #5 on: July 29, 2010, 11:23:45 pm »
All I can think of is:
Logged
They're like expensive pokemon... gotta catch 'em all.

Offline kevin derhouson

  • Hero Member
  • *****
  • Posts: 1645
Re: Meth injection nozzle size identification
« Reply #6 on: July 12, 2011, 06:18:36 pm »
its the fucking tri-force.

one year later ^_^
Logged
She lives.
new build details ---> http://freetexthost.com/hgidu250ql
current awhp: 387

Offline daniel Dee

  • Hero Member
  • *****
  • Posts: 1881
  • Fully drivable
Re: Meth injection nozzle size identification
« Reply #7 on: July 12, 2011, 07:09:23 pm »
Run them to a machine shop and ask them to measure the hole size..
Different water/meth companies list hole size with flow ratings.
Logged
92 AWD TSI 5spd<br />Built motor ,AEM EMS, Arc2 cdi 1050cc&1000cc Staged injectors Billet S366 T4,top mount manifold.666 AWHP@39psi (RG Dyno 2010). New mods E85, BF cams, 72mm turbo, 70mm throttle body />90 TSI (gone), 95 TSI 5 spd sold, 93 Mazda 5sp(sold), 97 Acura 5spd Vtec 99 Audi A4 quad 5sp 2018 Civicturbo 6sp ktuner

Offline John Hartman

  • Senior Member
  • Hero Member
  • *
  • Posts: 17539
Re: Meth injection nozzle size identification
« Reply #8 on: July 13, 2011, 04:54:00 pm »
or, novel idea, hook them the hell up, and spray them for a min into a grauated cylinder and see how much comes out  :D
Logged
91 Eagle Talon TSi 5spd awd.  GT-12, TriFlow Cams, 850s, Tial, JIC, Jackal, sticky rubber.
86 Merkur XR4Ti 5spd, rwd, turbo, 91,381km.  Original paint, heated leather. intercooled, big VAM, Full 3" exhaust, Cossie sway bar, 16" tires.
06 Mazdaspeed6 6spd awd, DISI turbo, heated leather HIDs, Corksport, Cobb, Konig, Centric...
2018 VW Golf Alltrack turbo Tornado Red, 6mt, some free mods

Offline Jordan Kruger

  • Senior Member
  • Hero Member
  • *
  • Posts: 2210
Re: Meth injection nozzle size identification
« Reply #9 on: July 13, 2011, 05:41:21 pm »
Just install them all permanently and tune that shit.   :D
Logged
337awhp.  ---> 500 awhp ? =)

Replacing parts since early 2010.

Offline Brett Haviland

  • Administrator
  • Hero Member
  • *****
  • Posts: 6531
Re: Meth injection nozzle size identification
« Reply #10 on: July 13, 2011, 08:44:07 pm »
i know...  here are the following specs on ur nozzles.



One on the left is LARGE, one in the middle is SMALL, and the one on the right is MEDIUM.

hahha.


Logged
I like Colts.  Turbo Colts.

Offline CamWeiss

  • Hero Member
  • *****
  • Posts: 1747
Re: Meth injection nozzle size identification
« Reply #11 on: July 14, 2011, 12:37:42 am »
Holy thread bump, batman!
Logged
Objects in mirrors appear to be losing.

'92 6/4
'86 325e
'72 240z
'76 R75/6
'07 KTM 640 ADV

Offline lyle chavez

  • Hero Member
  • *****
  • Posts: 675
Re: Meth injection nozzle size identification
« Reply #12 on: July 14, 2011, 01:39:03 am »
+1 John
Logged

Offline kevin derhouson

  • Hero Member
  • *****
  • Posts: 1645
Re: Meth injection nozzle size identification
« Reply #13 on: July 14, 2011, 11:27:05 am »
Quote from: CamWeiss on July 14, 2011, 12:37:42 am
Holy thread bump, batman!

my bad :p
Logged
She lives.
new build details ---> http://freetexthost.com/hgidu250ql
current awhp: 387

Offline CamWeiss

  • Hero Member
  • *****
  • Posts: 1747
Re: Meth injection nozzle size identification
« Reply #14 on: July 15, 2011, 07:45:41 am »
fyi, this information is useful. I still haven't switched nozzles!
Logged
Objects in mirrors appear to be losing.

'92 6/4
'86 325e
'72 240z
'76 R75/6
'07 KTM 640 ADV
Pages: [1]
« previous next »