I've followed these instructions:
http://www.rowand.net/Shop/Tech/WiringHeadlightRelays.htmI've got the 20A Bosch relay frow Boyz Audio in richmond.
I've wired the trigger wire from both left and right power wire from the low beamlights, then wired the same wire that's cut (the one going to the light) to the 87.
I've wired the new power feed from the batt and fused with 30A fuse, to the 86 on the relay.
New ground connected to the engine bay by the intake, sanded it down a little...
I've only used 1 relay and I've only wired for the low beams...
Now the right HID flickers a little, but much better than before...
AND it doesn't like to turn off, I have turn off the lights normally, then I have to hold on the high beam but not yet to the click.
Also, when the light doesn't turn off, the high beam light's partly on, but still dim...
So I need a new relay? and also 20A or do I need more amps?
Sorry, I'm not so good at power calculations:P
Thanks for any help in advance